|
Post by AshesOfAnother on Aug 24, 2016 16:25:52 GMT -6
I'll add it to the service manual section tonight.
|
|
|
Post by lyle on Aug 24, 2016 17:21:11 GMT -6
I'll add it to the service manual section tonight. Thanks so much.
|
|
|
Post by AshesOfAnother on Aug 25, 2016 17:12:00 GMT -6
|
|
|
Post by lyle on Aug 25, 2016 18:32:50 GMT -6
Thanks. What am I supposed to use to view everything. The 750 specific worked last night on my droid and this morning it stopped and hasn't come back all day. As to the link thank you I'm halfway there. Let me know when I can view the rest of the manual. There is some other electrical data I need. Thanks again!
|
|
|
Post by AshesOfAnother on Aug 25, 2016 19:08:45 GMT -6
I just started scanning it. It's going to take a bit, but I'm cutting ahead when members need stuff. There is a request section in the service manual board. I'll have the rest up section by section. It's a pretty lengthy process
|
|
|
Post by lyle on Aug 26, 2016 8:03:48 GMT -6
I just started scanning it. It's going to take a bit, but I'm cutting ahead when members need stuff. There is a request section in the service manual board. I'll have the rest up section by section. It's a pretty lengthy process I just saw its 500+ pages. On Suzuki's sight. I hear ya. What I need are the amperages of the fan and fuel pump. I believe there around 7.5 each but not for sure I broke my meter this morning (dropped while putting it in series with each fuse). If you could just right the info. I don't need the scans.
|
|
|
Post by AshesOfAnother on Aug 26, 2016 8:04:49 GMT -6
I will check it out for you.
|
|
|
Post by AshesOfAnother on Aug 28, 2016 18:29:19 GMT -6
Amperage as in the fuse, or how much they actually draw? Cooling fan relay has a 15a fuse. Fuel pump relay has a 10a fuse. The fan should read an amperage no higher than 5 amps. There is no draw information on the pump.
|
|
|
Post by lyle on Sept 3, 2016 7:58:14 GMT -6
Amperage as in the fuse, or how much they actually draw? Cooling fan relay has a 15a fuse. Fuel pump relay has a 10a fuse. The fan should read an amperage no higher than 5 amps. There is no draw information on the pump. Thank you. I got the go ahead from the dealer. Kind of not really........ So I have the extended warranty and come to find out every part will not be under warranty due to the amount I ride(normal wear and tare) f@#k warranties! Sorry just venting.
|
|
|
Post by AshesOfAnother on Sept 3, 2016 7:59:49 GMT -6
Manufacturer defects is a funny term, isn't it
|
|
|
Post by lyle on Sept 4, 2016 6:18:13 GMT -6
Manufacturer defects is a funny term, isn't it What are the spark plugs its almost time and I'm going to pre order them. Thanks!
|
|
|
Post by AshesOfAnother on Sept 4, 2016 7:59:56 GMT -6
7500 miles
|
|
|
Post by northernrider on Sept 4, 2016 15:48:24 GMT -6
Either NGK CR9EIA-9 or Denso IU27D are the standard plugs. I'm told that Denso makes better iridium plugs if there're available in your area.
|
|
|
Post by lyle on Sept 5, 2016 4:07:54 GMT -6
Either NGK CR9EIA-9 or Denso IU27D are the standard plugs. I'm told that Denso makes better iridium plugs if there're available in your area. Thank you I'll look for both!
|
|
|
Post by itexmon on Sept 13, 2016 13:20:41 GMT -6
Lyle, this bike probably has the same or a very similar stator as the GSXR siblings. 378W or ~30 Amps at 12V. Pretty powerful!
|
|